How To Fix A Lazy Susan Kitchen Cabinet
You can adjust a lazy susan cabinet pole in a few minutes with some hand tools.
How to fix a lazy susan kitchen cabinet. This video will show you have to adjust your lazy susan cabinet so that the lazy susan is at the right height. Youll begin by installing a lazy susan mount at the bottom of the cabinet then marking where the screws should go. Look for the locking screws located on the shelves in the center.
In this situation youll need to loosen this shelf. Tthen drill holes for those screws and lock the mount in place. Look under the lazy susan shelf and you will see that it is supported by a bracket.
When i put it back together its doors were dragging on the cabinet bottom. Adjusting so the front faces of the lazy susan aligns with the other cabinet fronts. When a lazy susan becomes stiff and difficult to rotate the problem is usually caused by either the center shaft or the position of its bottom shelf.
You can then slide the pole and shelves into the bottom mount first then the top and screw both ends in place. Loosen both screws and raise the shelves together so that the bottom shelf clears the base of the cabinet. It turned out the trick for me was to loosen the set screw at the bottom of the vertical post but on top of the bottom shelf then lift the whole thing up a little bit which allowed a sliding post within the center post to slide down.
Repeat the process for the mount at the top of the cabinet then slide the shelves onto the pole. I had to take it apart and remove it so a plumber could get to a drain line behind it. After the sliding post slid down i.
I was struggling with my corner cabinet lazy susan too. Step 2 locate the support bracket. Step 1 empty the cupboard.