How To Put Tiles In Bathroom Wall
Installing bathroom wall tiles is simple until you have to cut tiles.
How to put tiles in bathroom wall. In this situation you will want opposite end wall tiles to be the same size. The bathroom wall will not necessarily match the dimensions of the tiles so you will need to cut tiles to fit along the edge of shower stall and tub. Put enough glue on the wall to cover a couple of rows of tiles.
If youre tiling over a. The tiles have to be. Take a tile for the edge of the wall and apply the adhesive to the back as if you were putting butter on a piece of toast.
Before you start make sure the wall is covered with moisture resistant gypsum board and that the surface is smooth and flat. Once again use the notched side of your trowel to put trenches in the glue as you spread it. Here wall tiles are installed in a bathroom.
In addition you have to measure the width of the walls to see how much you have to cut from the tiles around the corners. Next use a tape measure along the tiles to see how much you have to cut from the first row of tiles you should install full tiles on the last row. Then lay your tiles on the the floor in a straight line making sure you put spacers between them.
Then position the tile where it needs to go and add the spacers. The tiles come in standard sizes. Hang edge tiles by applying adhesive to the backs of the tiles.
You will also need to cut tiles to fit around faucets handrails soap dishes and other hardware. If one wall has three quarter size tiles the opposite wall should have tiles of the same size. If you need to trim a tile before you lay it leave that area free of glue and do that tile as part of the next step.