How To Remove A Drop In Bathroom Sink
The procedure for removing drop in sink involves disconnecting the drain and the faucet loosening the clips and cutting through the caulk holding the sink to the countertop.
How to remove a drop in bathroom sink. All you need is a few tools and 30 minutes of your time. Work around the sink basin until you have broken out the entire inside of the sink. After the grip is released lift the sink out of the slot.
This is the weakest part of the sink and should drop into the cabinet without too much effort. Slide the end of the pry bar under the edge of the sink. I figured it out and want to spread the word on how easy it is.
I could not find a video instructing me on how to remove my ceramic or porcelain sink for my bathroom renovation. Now carefully place the new sink in its position. Use a rubber mallet and a putty knife to release the seal between the counter and the sink.
When the sink is free you can simply lift it out. Now attach the faucet to the new drop in bathroom sink. Remove the sinks clips.
Step 5 remove the sink. Place a pry bar on top of the plastic putty blade. Step 6 silicone sealant.
Put a towel over the top of the sink to keep sharp flying ceramic chips in control and with your trusty framing hammer give the sink a few whacks in the center near the drain. Mark the position of the drop in bathroom sink and apply a thin layer of silicone sealant. Ashlee and cody walk through how to remove an old undermount sink and install a new one.