How To Replace Kitchen Sink Strainer

If you cannot get a good grip on it you may.

How to replace kitchen sink strainer. This will be used to wrap a seal around the base of the new sink strainer. If the entire basket spins insert the handles of a pliers into the strainer grate from above and stick a screwdriver between the handles to hold it still. A video on how to replace a kitchen sink strainer basket.

The home mender dustin luby shows us how to replace your kitchen sink drain basket strainer stopper. Click the links to see hwats in dustins toolbox you can do it. Once the old sink strainer is removed take some plumbers putty and roll it out into a one foot length.

Tips on kitchen sink drain wrenches and what to do if the lock nut on the strainer basket is stuck or hard to remove. Reach over the front of the sink or have an assistant hold the screwdriver from above. Place the sink strainer with the plumbers putty attached into the drainage hole in the sink and press down hard.

This can be a little tricky sometimes. Replacing drain pipes under the kitchen sink and check for leaks at the p trap and where the strainer drain meets the bottom of the sink and make sure there is no water leak at the rubber gasket. Kitchen sink strainers often rust out underneath the sink.

Use channel type pliers to loosen the slip nuts on the drain fittings then pull the drain trap off the tailpiece of the sink strainer. If you can move the drainpipe out of the way you can insert the pliers handles up into the strainer grate from the bottom to get a better handle on it yourself. Once the fittings are out of the way remove the old strainer nut with a large pair of channel type pliers.