How To Unplug A Bathroom Sink
Bleach and rubbing alcohol should help.
How to unplug a bathroom sink. This is where you need to clean the stopper mechanism of all dirt hair and debris. If you are working on a bathtub apply duct tape over the overflow opening at the front of the tub. Use the steps below if your.
Remove any debris caught inside the trap using an old toothbrush. You may have to do this for quite a while to get rid of stubborn gunk. Sometimes itll come right out.
Prepare for plunging as appropriate. If you need water use a different sink to clean the stopper. This involves removing the sink trap located underneath.
I hope you find it useful. With the pivot rod pulled out youll be able to lift out the stopper. If you cant loosen the nut by hand use pliers.
If you need to unclog a slow running bathroom sink drain pour baking soda down the drain followed by vinegar then plug the drain with a rag or a sink stopper. Cover the hole with a piece of duct tape or stuff it with a damp rag. If you are working on a bathroom sink seal the sink overflow outlet found at the top of the sink bowl just under the rim.
Allow the mixture to sit for about 15 minutes and boil a pot of water while. Many homeowners put off handling a slow drain but figuring out how to unclog a bathroom sink doesnt have to be complicated. Make sure to rinse the trap before reinstalling it.