Replacing A P Trap For A Bathroom Sink
The traps are prone to clogs and will need to be replaced periodically.
Replacing a p trap for a bathroom sink. Replace the sink trap to deal with buildup and clogged pipes that a plumbers snake or plunger cant fix. The p trap assembly on your sink traps waste and prevents sewage gas from escaping. How to replace a p trap diy guide.
If there is room cut the sewer pipes with a handsaw as it is easier to make a straight cut. You can adjust the p trap sliding it up and down on the pipe that leaves the sink drain. The sink drain starts as a tailpiece and may reach the p trap without additional parts.
The trap bend should slide off fairly easily though you may need to wiggle it slightly to loosen it. Replacing this is an easy do it yourself job that will take less than 20 minutes and usually costs under 20. The other end of the p trap can slide into and out of the fitting on the wall.
If installing an abs p trap use only abs cement. Loosen the slip nuts holding the curved trap bend to the sink tailpiece and the trap arm using tongue and groove pliers. If your sink clogs often or smells funny replacing the p trap may just solve the problem.
If there is room cut the sewer pipes with a handsaw as it is easier to make a straight cut. Replacing a sink trap is pretty quick work. If the p trap doesnt align with the drain that comes out of the wall you may have to cut the tailpiece that.
It is there to keep sewer gas that bypasses from the vent from coming in to the bathroom. Things even a monkey should know is a show about things everyone should know about doing fixes around the house yard and cars. When the p trap is placed in its right position slide the nut over the gasket and screw it down on the sinks tailpiece.